SIP Trunking -Definition and Examples

.

What is SIP Trunking ?

.

The term “trunk” came from circuit-switched telecommunications. It refers to a dedicated physical line that carries many signals simultaneously. The trunk is used to interconnect routers and switches between two telecommunications systems. The term “trunk” has been used with Session Initiation Protocol (SIP) despite its reference to a physical circuit. SIP trunk is not dedicated. It allows any number of clients to connect to it due to the nature of the Internet Protocol (IP).  SIP trunk is a virtual connection between telecommunications systems. It is more like a service than a connection. This service is based on SIP and delivered by Internet Telephony Service Provider (ITSP) to a large number of clients that connect.

siptrunkWhen requests come to the server which is providing the SIP trunking service, the server applies its rules on these requests. If  a request is formatted based on the server’s pre-defined rules Then a  pre-defined decisions will be made by the server on that request. The decisions are pre-defined processing & routing of the requests. The rules and the decisions define the behaviour of the trunk and they are configured in the configuration file of the provider’s proxy. SIP trunk behaviour is described in a contract between the client who bought this service and the server who is selling this service. The client is another server and it uses the trunk on behalf of end users.

Examples of SIP trunk

First i want to clarify what is called Direct Inward Dialing (DID) or Direct Dial-in (DDI) number:

♣ In PSTN world: It is a globally unique number that can be called directly from the PSTN. Number is in E.164 format (CountryCode+CityCode+SubscriberNumber).

♣  In VOIP world: It is virtual DID. It is the number that your ITSP assigned to you to connect you (as VOIP user) to the PSTN around the world.

SIP Trunk Examples:

  • Interconnection to the PSTN using SIP trunk: This virtual trunk will be between SIP-enabled PBX like Asterisk as trunk client and VOIP service provider (ITSP) as trunk provider. When the PBX registers itself (Sending SIP REGISTER Request periodically) to the ITSP, the ITSP knows the IP address of the PBX so the ITSP can send the inbound calls to that IP address. If the registration is not required, a pre-defined IP address is used by the ITSP. The PBX  is configured to trust the requests coming from ITSP (static peer). The inbound calls are delivered to the PBX by the ITSP. The PBX will route the call depending on the DID number which must be kept in the SIP request. The ITSP’s proxy overwrites the Request-URI with the PBX’s  registered  SIP contact (user direct route learned during PBX registration and involved in the “Contact” header field of the INVITE requests and responses). The user-part of the Request-URI can be replaced by the original DID.

Diagram1

The outbound calls are delivered to ITSP by the PBX. The mapping between the dialed DID and its corresponding SIP User-ID could be:

♥ User-ID = DID number (one to one relationship).

♥ User-ID = Constant prefix + DID or part of DID (one to one relationship).

♥ Set of DIDs is a set of aliases to the same SIP User-ID. The SIP user can have multiple DIDs. These DIDs are stored in the database of the ITSP’s proxy (one to many relationship). OpenSIPS stores aliases in “dbaliases” table. This table requires uniqueness on the “alias_idx” index. So it is ok to have many lines for the same user with different aliases.

♥ Anyway to do the translation and make the routing possible.

Getting the corresponding VOIP user-ID from  the  dialed DID number and the registered device’s location (IP address) from the user-ID are done by the ITSP’s proxy. The needed information are stored in the database of the ITSP’s proxy/registrar. The ITSP’s proxy/registrar see the IP-PBX as a SIP user with multiple DIDs (multiple aliases).

  • Interconnection to other server-based systems (voicemail servers, call centers, application servers): Usually runs over TCP and secured by TLS. The request URI is formatted according to RFC 4458. The requests are terminated in a SIP-based server. I will back explain this later.
  • SIP-based Interconnection between IP-PBXs: I will explain in another article.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s