The Domain Name System (DNS) can be used to store the telephone numbers in E.164 format and identify the corresponding service. The domain “e164.arpa” is populated to make the DNS able to store the E.164 numbers. This domain is divided in subdomains so you should contact the corresponding zone administrator in order to list your E.164 number.
Explanation by Example
The DNS client string is “+441632910011” . It is a telephone number in E.164 format and we want to get the information about the service associated with this number (Service Type, Transport Protocol, Port number, IP Address). The DNS client which performs the look up operations, can be part of any kind of network servers .The corresponding domain name for that number will be “126.96.36.199.188.8.131.52.184.108.40.206.e164.arpa.”. The figure below shows the steps to get the IP address of the server which provides the service and some information about the service. We will explain this below.
Step 1: Getting SIP URI as a Result of First DNS Look Up Operation
The DNS client performs the first DNS lookup on the domain name “220.127.116.11.18.104.22.168.22.214.171.124.e164.arpa”. The output are two NAPTR records:
NAPTR 10 100 “u” “E2U+sip” “!^.*$!sip:firstname.lastname@example.org!” . # Record Number 1
NAPTR 10 101 “u” “E2U+h323” “!^.*$!h323:email@example.com!” . # Record Number 2
Here we have two records associated with that name. The fields in each record are: order, preference, flags, service, regular expression, and replacement.The “order” specifies the processing order of the NAPTR records. The “preference” specifies the processing order of the NAPTR records that have same order value. Here both records have an “order” value of 10 but the first one has the lowest “preference” value. So the DNS client will pickup the first record.
The “u” flag means that the output will be a URI. The service name in the selected record is “E2U+sip” and it means the record is used in Telephone Number-to-SIP URI queries.
The regular expression “!^.*$!sip:firstname.lastname@example.org!” takes this form: “Delimit ERE Delimit Substitution Delimit Flag”.
Delimit = !
ERE (Extended Reqular Expression ) = ^.*$ which means everything from the beginning of the user string till the end.
and No flags.
The replacement field in the NAPTR record if not present must be indicated by dot (.). if the replacement field is present then the reqular expresion field should be an empty string (“”). The replacement field if present must be a FQDN. So when DNS Client pickup the first record, the result of the first step will be the SIP URI sip:email@example.com. The pattern provided in the regular expression filed is used. As we see here, we get SIP URI from E.164 telephone number. We can stop here if that is what we want. Note: You can use “Dig” in linux terminal to perform a DNS lookup: # dig -t naptr 126.96.36.199.188.8.131.52.184.108.40.206.e164.arpa.
Step 2: Getting the service’s FQDN (Include Service type + Transport Protocol)
Now the DNS client string is “sip:firstname.lastname@example.org” .The client performs a second DNS lookup on the domain name “example.com“. The output are two NAPTR records:
IN NAPTR 100 10 “S” “SIP+D2U” “!^.*$!sip:email@example.com!” _sip._udp.example.com.
IN NAPTR 102 10 “S” “SIP+D2T” “!^.*$!sip:firstname.lastname@example.org!” _sip._tcp.example.com.
Here the replacement field is present and the regular expression is also present (i.e. the regular expression should be empty but this is not mandatory). The flag “S” means the replacement field contains a FQDN which points to SRV record. The DNS client picks the first record because it has the lowest order value. The replacement is applied and the result will be ” _sip._udp.example.com“. The service is SIP and the transport protocol is UDP.
Step 3: Getting Server’s FQDN and Listening Port Number
Now the DNS client string is “ _sip._udp.example.com“. The client performs the third look up on “_sip._udp.example.com“ and it gets the SRV records. This record takes this form “_Service._Protocol.Name TTL Class SRV Priority Weight Port Target”
The record in this example:
_sip._udp.example.com 86400 IN SRV 0 5 5060 sipserver.example.com
Service: The service name is sip,
Protocol: The transport protocol is UDP,
Name : The domain name is example.com,
TTL: Time to live is in seconds is 86400
Class: The DNS class is IN
Priority: the priority of the Target is 0.
Weight: The relative weight of this record is 5.
Target: The hostname of machine which provides the service. sipserver.example.com
The result of this step is the FQDN “sipserver.example.com” which represents SIP server listening on port 5060.
Step 4: Getting the IP Address
The client prforms DNS look up on “sipserver.example.com“ . The output is A record which contains the IP Address.
Using Domain Name System (DNS) we can get the service information (Mainly the Service Type, Transport Protocol, Port number, and IP Address) associated with a specific telephone number (E.164 number) .